LE1-D Magnetic starter is suitable for using in the circuits rated voltage up to 690V AC50Hz or 60Hz.
Magnetic Motor Starter
LE1-D Magnetic starter is suitable for using in the circuits rated voltage up to 690V AC50Hz or 60Hz. With AC-3 type, LE1-D is used for starting or halting of three-phase
squirrel case electromotor which rated working voltage is 380V and rated working current is from 9A to 95A. Combining with matchable thermal relay can protect the
motor from overload and phase failure.
Ambient air temperature: -5°C~+40°C, average temperature of 24 hours must below +35°C
Relative humidity: The maximum temperature of 40 degrees, the air relative humidity not exceed 50%, at a lower temperature can allow for a higher relative humidity. The humidest month's average lowest temperature must be below 25°C,the max relative humidity of that month should not exceed 90%. lf humidity changes as a result of
occasional gel generated, should eliminate it.
Installation category: Ⅲ
Installation position: The installation degree of the tilt and vertical plane should not exceed ±5°.
Shock vibration: Products should be installed and used without significant shake, shock and vibration place.
Confly International has been specialized in manufacturing and marketing magnetic motor starter for over 15 years which is now known as one of the leading manufacturers and suppliers. Offering customized service, we warmly welcome you to wholesale quality equipment from our factory.