Yueqing Confly International Co.,Ltd
Contact US
Address: Room 1404, No.A Building, Jinma Garden, Chengnan Street, Yueqing, Zhejiang, China (P.C:325600)
TEL: +86-577-61586625
FAX : +86-577-61586625

IEC60947-2 Approved Moulded Case Circuit Breaker MCCB

FNT9M series Moulded Case Circuit Breaker is an ideal selection for the management of global energy efficiency.

    IEC60947-2 Approved Moulded Case Circuit Breaker MCCB


    FNT9M series Moulded Case Circuit Breaker
    FNT9M series Moulded Case Circuit Breaker is an ideal selection for the management
    of global energy efficiency
    FNT9M series Moulded Case Circuit Breaker(MCCB) will provide the integrated
    solutions for the global energy and infrastructure, industry, datacenters and networks,
    buildings and residential markets. ln the markets of energy and infrastructure, industrial
    processes, building automation, and data centers and networks, etc. the circuit
    breaker is a world leader. ln the residential applications, it also has strong market
    power and committed to providing customers with safe, reliable, efficient energy.
    FNT9M series Moulded Case Circuit Breaker will be the best circuit breaker in
    secondary distribution systems
    FNT9M series MCCB is the products which our CONFLY company specifically
    tailored for the two distribution, particularly suitable for two power distribution, civil
    construction market as well as mechanical and electrical market, to help you easily
    build the most secure and reliable distribution Network.
    FNT9M series products Simple selection
    Full range of products, only three kinds of shell frame sizes, fewer standard size to
    facilitate future expansion and upgrade.
    Full scope of protection, including low-voltage distribution system protection, motor
    protection and leakage protection.
    FNT9M series products Easy installation
    Installation methods include fixed and plug-in
    Various accessories can be installed in the field
    Swap down the line without derating, distribution box to avoid a "spider web".
    Flexible installation location can be vertical, horizontal, side or back of the installation;
    product' s performance unaffected
    Provide a full range of installation and connection accessories to meet different
    installation requirements.
    FNT9M series products Easy to use
    Switch status effective and reliable, and accurate position indication contacts, bring
    you "visible security"
    Protection class up to IP54.
    Operating modes include toggle operation, direct rotary handle operation and extended
    rotary handle operation.
    Provide leakage alarm does not trip function to ensure safety and better safeguard
    the continuity of power supply


    FNT9M series Moulded Case Circuit Breakers are suitable for AC 50/60Hz, rated working
    voltage 500V (400/630A for 440V), rated current from 15 to 630A of distribution network,
    for the distribution of power and protection circuits, power supply and electrical equipment
    from endangering overload and short circuit to improve the power supply reliability and
    continuity.
    Compliance with standards
    International standards:
    IEC 947-1: General (GB/T 14048.1);
    IEC 947-2: Circuit Breaker (GB/T 14048.2);
    IEC 947-4: Contactors and Motor Starters (GB/T 14048.4);
    IEC 947-5.1: Control Devices and Switches; Automatic Control Element(GB/T 14048.5);
    GB 14048.1 General;
    GB 14048.2 Circuit Breaker
    National Standards:
    Hot and Humid Measure
    FNT9M Circuit Breakers and auxiliary devices T2 hot and humid conditions, comply
    with the following standards:
    IEC 68-2-30 At 45 degrees Celsius,95% relative humidity (wet mat to heat and weather);
    IEC 68-2-11 Salt Spray Test
    Isolation
    All FNT9M Circuit Breakers are suitable for isolation, comply with the standard IEC 947-2:
    Contact isolated position in the "0" (OFF position);
    Unless the contact is fully open, operate slot can not be "OFF" position;
    contacts are open state license before they can install a padlock;
    lnstallation of extended rotary handle does not change the reliability of the position
    indication system.
    lsolation has assurance testing Guarantee:
    The reliability of mechanical contact is ensured by the position indication system;
    No leakage current;
    Overvoltage tolerance refers to the ability of withstanding voltage between its inlet
    and outlet.
    Installation of class ll switchboards
    Circuit Breakers should be installed in all FNT9M class ll switchboards (according to
    IEC 664 standard);
    No special installation operation, because FNT9M circuit breaker provides class ll
    panel and all insulation of internal circuits.
    Cable entry
    FNT9M online outlet into the next lower usage, no need to consider derating (except FNT9ML). This feature will provide greater convenience
    to the switchboards installation
    FNT9M Series Circuit Breaker Low Voltage Distribution Systems Protection
    Functions and Features 

    Confly International has been specialized in manufacturing and marketing iec60947-2 approved moulded case circuit breaker mccb for over 15 years which is now known as one of the leading manufacturers and suppliers. Offering customized service, we warmly welcome you to wholesale quality equipment from our factory.

Related Products
Inquiry